3.8L SC Engine
Crank Position Sensor - '89-93 Thunderbird SC
NEW BATCH Crank Position Sensor - Gen 1 & 2 V6 SHO
Coated Rotors with Upgraded Bearing Plate from Magnum Powers
Power Steering EVO O-Ring Rebuild Kit with Line Seals
EGR Block Off Plate
Magnum Powers 10 Rib 15% SC & JS Pulleys, Belt & Tensioner Springs
This package includes a pair of 10 rib pulleys for the supercharger and the jackshaft that give a total of 15% overdrive for the supercharger. A premium quality 10 rib SC belt is included as well as a pair of the stiffer tensioner springs.
Magnum Powers 10% Overdrive Crankshaft Pulley
This billet aluminum crank pulley is significantly lighter than the stock steel crank pulley and best of all...it allows for another 10% of overdrive on the supercharger without worrying about belt slippage. Typically adds 3 to 4 psi of boost.
POWER PACKAGE #1 from Magnum Powers - $100 Off
This Performance Package with a stock long block is capable of huge power gains for stock or modified engines when combined with other supporting air flow and fuel upgrades.
POWER PACKAGE #2 from Magnum Powers
This Performance Package with a stock long block is capable of huge power gains for stock or modified engines when combined with other supporting air flow and fuel upgrades.
Magnum Powers 85mm Throttle Body
The ULTIMATE throttle body for your 3.8L SC engine. This unit is designed to work best with the Magnum Powers Supercharger Inlet Plenum/MPx blower. It will will fit a standard inlet plenum but substantial porting will be required to port match the 85mm inside diameter to the plenum inlet.
Supercharger Top Spanner Nut Wrench
The PROPER tool for removing and installing supercharger tops. This tool makes quick work of removing and reinstalling the collar nut on your supercharger top. Will not mar the finish when used in conjunction with a cloth on the nut and has a 1/2" drive ratchet fitting for using a torque wrench when reinstalling the collar nut. Proper torque is necessary for a vacuum leak free seal!
Magnum Powers "Classic" Big Bore Throat SC Top
The original! No other SC top throat is bigger! The only enlarged throat supercharger top available with a thin, stock looking lower flange. Our BRAND NEW aluminum castings provide superior flow capability with a larger throat opening than ANY welded top that uses a spacer.
Heavy Duty Tensioner Spring Set - A MUST HAVE ITEM!!
When over driving your supercharger there is a tremendous amount of pressure put on the belts to keep them in contact with the supercharger spinning upwards of 15,000 RPM or higher. The stock supercharger and jack shaft belt tensioners are simply NOT up to the task so we are now offering a pair of heavy duty tensioner springs for these tensioner arms. This item includes two springs. One for the crank to jackshaft belt, and one for the jackshaft to supercharger belt.
SC Water Pump with Gasket - Lifetime Warranty
OEM quality replacement water pump with a new gasket. Includes the preferred 8-rib impeller
Set of 3 SC Engine Radiator Hoses
Replacement OEM quality rad hoses are suggested every 3 to 4 years to keep your SC engine running cool. Be proactive, not dumb-active in your cars maintenance!